It should be able to meet the following basic requirements:
(1) to ensure maximum torque issued by engine, and there has a certain engery transfer torque force.
(2) Can achieve separation, complete separation, soft engagement, and has a good heat dissipation
(3) The moment of inertia of the driven part should be as small as possible. In this way,
when the separation clutch,shift gear, it connected to transmission input shaft, the rotation speed is
relatively easy to change, thereby reducing the impact between the gears.
(4) It has the ability to mitigate the impact of rotation direction and attenuate the vibration in this
direction, with low noise.
(5) The pressure of the pressure cover and the friction coefficient of the friction plate change little
and work stably.
(6) Easy and convenience to operate and maintain,resulting in improving efficiency and reduced cost.